Mounting Accessories
EHA-ADAPT-3RD-TEN-BR
For use with round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. Fits onto a 3” poles.
EHA-ADAPT-4/5WALLBRACKET-BR
180° Wall Mount Bracket with 2-3/8″ O.D. tenon can be mounted to almost any surface: wall, roof, or wood pole. Provides wiring access and has a built-in 2-3/8″ O.D. tenon to mount a fixture using our adjustable slip-fitter.
EHA-ADAPT-4RD-TEN-BR
For use with round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. Fits onto a 4” poles.
EHA-ADAPT-4SQ-TEN-BR
For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. Fits onto a 4” poles.
EHA-ADAPT-5RD-TEN-BR
For use with round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. Fits onto a 5” poles.
EHA-ADAPT-5SQ-TEN-BR
For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. Fits onto a 5” poles.
EHA-ADAPT-90DEG-WallMount-HDUTY
This tenon arm for wall mounting can be mounted on any flat surface and is built from heavy duty steel. It features a single 2 3/8 inch O.D. tenon.
EHA-ADAPT-QUAD90-HOR-TEN-BR
The bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Four fixtures can be mounted to the round external mount horizontal tenons and adjusted horizontally.
EHA-ADAPT-SQ-POLE-SIDE-TEN-BR
The Slip Fitter Adaptor is designed to mount light fixture that is equipped with an adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
EHA-ADAPT-SUB-RD-POLE-ADPTR-BR
The Round Bar Adaptor allows an arm mount or slip-fitter to be installed on a round pole. This additional part provides a flat surface for easy installation of fixture mounting parts.
EHA-ADAPT-TRIPLE-90-HOR-TEN-BR
The bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon.
EHA-ADAPT-TRIPLE-120-HOR-TEN-BR
The bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Three fixtures can be mounted to the round external mount horizontal tenons and adjusted horizontally.
EHA-ADAPT-TRIPLE-BULL-3TEN-BR
The Bracket is designed to mount over 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
EHA-ADAPT-TWIN-90-HOR-TEN-BR
The bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the round external mount horizontal tenons and adjusted horizontally.
EHA-ADAPT-TWIN-180-HOR-TEN-BR
The bracket is designed to mount over 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the round external mount horizontal tenons and adjusted horizontally.
EHA-ADAPT-TWIN-BULL-2TEN-BR
The bracket is designed to mount over 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the round external mount horizontal tenons and adjusted horizontally.
EHA-ADAPT-YOKE-TEN-BR
This 2-3/8” OD Tenon Mount Adapter for trunnion Fixtures is designed to mount Konlite Area or Flood light fixtures that are equipped with a trunnion mount onto a 2-3/8” OD tenon.
EHA-ADAPT-SAA
External mount slipfitter, die-cast bracket, angle indicators & hardware, coin plug for photocell